IP55 Sensor
Floating Bean Atmosphere LED Sensor Light
Flexible silicone tactile housing with IP55 moisture shielding, pinch-dimming regulation, and ambient cold-temp auxiliary glow profile.
Nordic Verified Export Product Roster
Precision-manufactured cycling active hardware and accessories developed to bridge Swedish safety mandates (Transportstyrelsen standards) with high-output endurance across the Scandinavian winter corridor.
HD Alloy
HD Convex Aluminum Cockpit Rearview Mirror
Anti-vibration aluminum alloy stem with ultra-wide convex optical glass, designed to withstand wet salting and road corrosion in Swedish commutes.
Ergonomic Pad
Thermal-Active MTB Sponge Padded Underwear
Multi-density antibacterial structural foam designed for moisture absorption and thermal insulation underneath winter outer shell wear.
Cargo Safe
Cargobike Polycarbonate Wheel Guard Shield
Cold-crack-resistant skirt and coat guard for Scandinavian long-tail and box-bikes, preventing wet snow spray and outerwear snagging.
BPA-Free PP
620ml Frost-Proof Squeeze Cycling Bottle
Food-contact PP construction remaining pliable down to -15°C, featuring a self-sealing lockable valve and standardized cage retention geometry.
4000mAh Dual-System
4000mAh 600LM Flood Light with Audio Siren
High-drain USB-C rechargeable battery pack powering a dual optical diffuser array paired with an integrated 120dB horn unit for all-weather signaling.
300 PSI High-Bar
300 PSI Micro-Bleed Air Suspension Fork Pump
Precision aluminum gauge with zero-loss unthreading chuck, calibrating air shocks for extreme sub-zero fat-bike and gravel terrain conditions.
Seamless Nylon
Aero Waterproof Roll-Top Saddle Light-Pod
Abrasion-proof welded TPU ripstop bag equipped with rigid modular rear light mount clips, guarding equipment from heavy wheel slush.
-30°C
Sub-Zero Tested Range
Validated low-temp discharge stability
3,250 lm
Peak Optical Brightness
Dual-spectrum off-road trail illumination
100%
CE / RoHS / EMC Bound
Strict verification via third-party test reports
#2 Rank
Global Hardware Supplier
Verified B2B manufacturing track record
Industry Whitepaper Engineering
Technical Localization for the Swedish Cycling Ecology
Sweden's distinct seasonal day-length shifts, high safety vigilance under the Trafikförordningen, and polar-continental climates establish specific design challenges that generic lighting hardware cannot resolve.
Sub-Zero Low-Internal-Resistance Power Cells
Generic lithium-ion cells lose up to 60% of their operational capacity under freezing conditions due to elevated electrolyte viscosity. Kenus equips its Swedish-bound helmet light series with low-internal-resistance 18650 and 21700 battery chemistry, augmented with insulated thermal housing chambers. This design guarantees stable runtimes through Arctic commutations in Kiruna, Umeå, and Stockholm.
Dual-Vector Cut-Off Optic Pathways
Swedish road law demands that forward bike lighting delivers unambiguous positioning without dazzling oncoming drivers or cyclists. When mounting lights directly to the helmet, eye-tracking movement can disrupt peripheral vision for others. We engineer specialized optical lenses with anti-glare horizontal beam cut-offs, providing 180° field focus while respecting StVZO-aligned road standards.
IP64/IP67 Saline-Corrosion Defenses
Swedish winter maintenance relies heavily on municipal road de-icing salts (sodium and calcium chloride), which generate corrosive micro-mists that deteriorate circuit boards and standard silicone switches. Kenus utilizes CNC-machined 6063 aerospace aluminum enclosures with hard-anodized coatings, ultrasonically sealed charging ports, and silicone o-rings tested to prevent electrochemical degradation.
Long-Span Endurance for Polar Twilight
Between November and February, Sweden experiences reduced daylight hours, requiring continuous operation from dawn through dusk. Our intelligent micro-controller circuitry integrates adaptive pulse-width modulation (PWM) low-energy output modes, providing up to 16 hours of continuous auxiliary run time to ensure cyclists remain visible on unlit gravel trails and intercity bicycle corridors.
Universal GoPro-Interface Quick Detach
Cyclists in Gothenburg and Malmö regularly shift from gravel trails to cargo bike commuting. Our helmet lighting units incorporate quick-release brackets compatible with universal GoPro three-prong ecosystems and standard MIPS ventilation slots, allowing tool-free transitions between commuter helmets, MTB full-face gear, and handlebar setups.
Electromagnetic Compatibility (EMC) Safety
Modern European e-bikes feature high-frequency BLE controllers, GPS cycling computers, and electronic shifting mechanisms. Cheap lighting ballasts can emit radio interference that disrupts telemetry signals. Kenus lights are supported by SIT250212230201ER EMC inspection documentation, certifying clean electromagnetic performance without RF pollution.
Verified Manufacturing Facility
Direct Engineering Integrity from Jinhua, Zhejiang
Kenus Intelligent Technology Co., Ltd. operates an onsite-assessed industrial cycling hardware and accessories facility. Inspected directly by TÜV Rheinland, we provide European brand owners, importers, and Scandinavian sporting chains with direct supply chain accountability.
- TÜV Rheinland Assessed: Complete verification of production lines, QA workflows, and testing benches.
- CE Certification (Headlight): Verified under test registration No. SIT230614230201E.
- RoHS Hazardous Substances Cleared: Documented compliance No. SIT240417230101R.
- Rapid Prototyping: In-house 3D additive printing & laser marking for quick prototype turnaround.
Procurement Knowledge Base
Frequently Asked Questions by Swedish Importers
Detailed answers covering regulatory requirements, freight logistics to Swedish ports, customs duty codes, and private-label customization minimums.
Do helmet-mounted bike lights comply with Swedish road traffic laws (Trafikförordningen)?
Yes, provided they serve as supplementary illumination. In Sweden, Transportstyrelsen stipulates that any bicycle ridden in darkness must be equipped with a forward white/yellow light and a rear red light directly mounted on the bike itself. Helmet-mounted lights are legally classified as supplementary safety systems and head torches. They are widely recommended across Sweden for illuminating corners on dark cycling paths, gravel roads, and singletracks where frame-mounted lights remain locked to the wheel direction.
How does the Swedish winter environment impact lithium battery import regulations?
Under EU Directive 2006/66/EC and the upcoming EU Battery Regulation (2023/1542), all rechargeable batteries entering Sweden must undergo CE, RoHS, and UN38.3 transport testing for safety during freight transit. Because sub-zero climates cause premature cell failures in poorly assembled battery packs, we utilize high-stability, short-circuit-protected BMS (Battery Management Systems) to prevent low-temperature charging damage and ensure customs clearance at Swedish ports such as Gothenburg and Helsingborg.
What is the typical Minimum Order Quantity (MOQ) for custom OEM branding and Swedish packaging?
For standard factory configurations, sample and pilot evaluation runs start at low thresholds (as low as 2 pieces for basic testing). For custom OEM branding—including custom laser-etched Swedish logos, customized localized user manuals (Swedish/English), and bespoke retail packaging—MOQs typically range from 200 to 500 units depending on the complexity of the optical mould and enclosure finish.
What are the typical shipping lead times and DDP terms from your Zhejiang facility to Gothenburg?
Our factory is located in Jinhua, Zhejiang, providing direct transit access to Ningbo and Shanghai ports. Ocean freight shipments to the Port of Gothenburg (Göteborgs hamn) typically require 28 to 35 days on the water. For urgent seasonal shipments in autumn, air express options via Stockholm Arlanda (ARN) require approximately 5 to 8 working days. We work with experienced freight forwarders offering DDP terms, simplifying customs duties and Swedish VAT (Moms) management.
What test documentation do you provide for product safety compliance?
Every exported batch of lighting equipment is supported by official third-party laboratory test certificates. We provide CE documentation (SIT230614230201E), RoHS testing reports for environmental compliance (SIT240417230101R), EMC electromagnetic safety certification (SIT250212230201ER), and factory audit reports verified onsite by TÜV Rheinland.
Optimize Your Nordic Cycling Hardware Supply Line
Connect with our engineering and export team to request wholesale pricing tiers, technical compliance files, or sample units tailored for the Swedish market.